联系我们

山东添钰金属制品有限公司

电 话:0635-8225288

传 真:0635-8225288

手 机:13020588211、18920066733

网 址:fangdangang.cn

地 址:山东省聊城市开发区辽河路与泰山路交口(地图搜索山东添钰金属制品有限公司即可)

您的当前位置: 首 页 >> 产品展示

装甲防护钢

发布日期:2020/10/15
作者:山东添钰金属制品有限公司
点击:711
生产工艺流程:BP系列防护钢采用氧气转炉冶炼镇静钢,经过二次精炼后进行连续铸造,连铸坯送热轧厂再加热并采用控轧控冷工艺轧制成卷,经强
力矫直切板后进行热处理,性能质量检测合格后准发交货。交货状态:BP系列热轧防护钢可采用控轧、淬火、淬火加回火等状态交货。
加工配送服务:根据用户需求,钢板可采用抛丸、涂漆表面预处理方式交货。可提供钢板下料、折弯、构件加工等延伸服务。
Manufacture process: The steel is made in oxygenconverter, fully killed, secondary refined and castedin t o slabs. The slabs are reheated and rolled i n t o coil inTMCP rolling process. After powerful leveling, cutting,heat treatment, and inspection, the BP plates aredelivered in sheets.Delivery condition: TMCP, quenched, quenched andtempered etc.Processing and distribution service: Accordingto customers' requirements, steel plate can bedelivered with pretreatment such as blasting, paintingetc. Additional services e.g., blanking, bending andmachining are also provided.
制造工艺及交货状态
Manufacture process and delivery conditions
牌号及可供规格范围
Steel grades and specification
牌号含义
BP500 B:宝钢,P:Protection,装甲防护钢,500:布氏硬度级别BP系列热轧防护钢可供规格如下表所示,超出规格范围可与宝钢热轧防护钢产销研小组联系(附后)。
SpecificationBP500 B: 
Baosteel, P: Protection, 500: Brinellhardness valueSpecification of BP steels is tabulated in the following. Ifcustomerrequirement is out of the specification range,please contact technical customer service for furtherassistance.
交货技术条件-化学成分,wt% 
Chemical composition, wt%


交货技术条件-力学性能Mechanical properties

钢板尺寸、外形、重量及允许偏差Dimension, shape, weight and tolerance
钢板尺寸、外形、重量及允许偏差满足《GB/ T709-2006热轧钢板和钢带的尺寸、外形、质量及允许偏差》的要求。
BP系列防护钢采用特殊热处理工艺制造,板形质量优异,整板不平度可以达到≤3mm/m。用户如对尺寸公差、不平度等有附加要求,

Dimension, shape, weight and tolerance satisfy GB/T709-2006 Dimension, shape, weight and tolerances forhot rolled steel plates and sheets
BP steels are manufactured by special heat treatmentprocess with superior shape and flatness within ≤3mm/m.Additional requirements concerning the dimension t olerance, roughness etc. should be confirmed bysupplier and be customer, and be specified in thecontract.
枪击标准及防护级别Ballistic standards and protection grades
BP系列防护钢抗枪弹性能优越,抗破坏性冲击能力强。参照的主要标准有:GA 164-2005、GJB 1694A-2000和GJB 59.18-1988。
BP steels have excellent ballistic performance and goodimpact properties.Standards: GA 164-2005, GJB 1694A-2000 and GJB59.18-1988.

钻铣加工Drilling
BP系列防护钢硬度高,机加工难度相对较大。钻孔加工一般应采用高速钢或陶瓷硬质合金钢钻头。为保证批量钻孔作业时的高效和精确,推荐使用
高速合金钢(HSS-E)或含钴高速合金钢(HSSCo)钻头。铣削加工时应确保夹紧工件,建议采用宽矩铣刀,平面铣刀的材质可选用硬质合金涂层、陶瓷合金等,端面铣刀可选用硬质合金、含钴高速合金钢等,尽量避免采用组合铣头,平面铣的切削宽度应为铣头直径的75%-80%
  • 上一个产品:装甲钢
  • 下一个产品:装甲钢
  • 返回上级产品
  • 山东添钰金属制品有限公司 专业从事于, 欢迎来电咨询!
    电 话:0635-8225288   传 真:0635-8225288   手 机:13020588211、18920066733
    COPYRIGHT 山东添钰金属制品有限公司 技术支持:前沿网络
    ICP备案:鲁ICP备19010983号-2

    收缩

    在线客服